College Info

This menu allows you to enter all the relevant information of your college in the General Information section such as College Name, RTO Code, CRICOS Code (Commonwealth Register of Institutions and Courses for Overseas Students), and ABN (Australian Business Number.)

Note: You must have a SADMIN (Super Administrator) role to set up this information.

From the Homepage, click Admin > Configuration and Setup > College Info.
Enter General college information, AVETMISS Training organisation identifiers for each state These identifiers usually includes 5 zeros and the RTO number e.g. 0000012345, Address, and bank details.

Click Update to save.

Course Type

Course type displays the types of course that are available in the Meshed Platform, for example; VET, ELICOS.

Enrolment Fee

An enrolment fee is a one-time charge that is often required by education providers when a student enrols in a course or program. It is a fee that is paid by the student to confirm their intention to enrol and is typically non-refundable.

The enrolment fee is different from tuition fees, which are paid on a per-course, per-subject, or per-semester basis. The enrolment fee is generally a smaller amount than the tuition fee, and is intended to cover administrative costs associated with processing the student's enrolment, such as creating a student profile, processing the application, and reserving a place in the course or program.

Enrolment fees may vary depending on the the program or course being enrolled in or the origin of students. Some education providers may waive the enrolment fee for certain students, for example those receiving financial aid or scholarships.

This menu allows you to set Enrolment fee information for each course. To set up, please follow instructions below:

Click Admin > Configuration and Setup > Enrolment Fee.
Enter Value for the Enrolment fee e.g. AUD200.00
Select Student Origin(s)
Enter validity date (fee valid until date).
On the drop down menu, select Course type e.g. ELICOS, Short Course, VET
Tick the box for the Course selected. You may apply the same enrolment fee for all courses by ticking the box for 'All Course' or for one course 'Selected Course'
Click Setup.

Note: You may have different Enrolment fees for different courses. You may set it up separately. You may also set up multiple enrolment fees for one course which will then be available to choose during Application stages.

OSHC Info

This menu allows you to setup Overseas Student Health Cover (OSHC) information and fees in your system.

The Australian Department of Immigration and Citizenship requires International students undertaking formal studies in Australia, and their dependants (for example, spouses and children under 18 years old), to maintain OSHC for the duration of time they are in Australia.

Information entered in this section will be shown on student application where student are provided option to include this service into their application. To setup, please follow instructions below:

On your RTO Manager, Click Admin > Configuration and Setup > OSHC Info.
Choose the provider name from the drop down menu. . If there is no provider information available, click Add New Provider.
Select OSHC Type from the drop down menu e.g. Single, Couple, Family. If there's no information available, click Add New Type from the drop down menu.
Select OSHC duration on the drop down menu. Duration can be from 3 months to 24 months depending on the OSHC provider information provided.
Select Validity start and finish date (for OSHC coverage).
Enter OSHC Fee value and click Add.
To set up Active Provider, tick the box for which provider/s you would like to make active and click Set Active.

You may also import OSHC Price-list by downloading the available template.

Click Download template Tab and open predefined excel spreadsheet and click Enable Editing. Enter information such as Provider name, OSHC type, Duration/month, OSHC fee and validity dates. Please do not take off the column headings.

Save the File to your desktop and go back to the page and click Choose File.
Look for the saved spreadsheet and click Upload.

Offer Document Checklist

Navigation: Admin> Configuration and Setup > Offer Document checklist

This tab allows users to define the documents that applicants will be required to upload at the final step of the online application process. These documents should be setup to meet the College application process requirements. The system allows for different documents for different student origins - overseas (offshore) students, overseas students in Australia (onshore), or resident/domestic students. Examples of documents are Birth Certificate, Passport, Academic Transcripts etc.

To set up the Offer Document checklist in the system:

Type in Document Name e.g. Birth Certificate, Passport, etc.
Select the Document type (see note below for further information).
Select Set Compulsory if the document is mandatory.
Select Set Active to make the document active in the checklist.
Select the applicable Student Origin for the document.
Click Add Document.
The new document will be added to the Offer Document list

Document Type

The System provides two pre-defined values for Document Type:

In_application will group documents required prior to issuance of offer and are to be submitted during the application process at Step 5.
Post_application will group documents required after the application process is completed.

In addition to these pre-defined values, users can configure custom values for Document Type using the System Fields Setup feature.

Custom values for Document Status, which allows for tracking of documents (for example; approved, pending, etc.), can also be configured using the System Fields Setup feature.

Agent Document Checklist

This tab allows you to create Document checklist for Agents. This checklist will show up on the Agents Registration form. To set this up, follow the instructions below:

Click Admin > Configuration and Setup > Agent Document Checklist
Enter Document name and select the checkbox to select whether documents are compulsory or not.
Tick the Set Active box to make it active.
Click Add Document to save.
To edit, activate and make the documents mandatory, click the edit icon
. To delete the document. Click the
delete button.

Note: You can only delete the Document if they have not been used in any application. You can however make it inactive if not relevant anymore.

Agent Status

Agent status refers to defining category for agents to allocate to. For example once the agent has applied for the agency for your college they may be given "provisional" status, or if has already signed a contract, can be given "active" status. To set up agent status category, follow the instructions below:

Click Admin > Configuration and Setup > Agent Status.
To enter new agent status, Type in Status Type e.g. Provisional, Active etc. Tick the box Publish under Agent List should you want to publish this agent on your website.
Select duration of the contract. Duration refers to the validity of the status for example: if an agent is contracted 12 months refers to the period of contract. Click Add.
You can edit the document name and Active options by clicking this icon
. You can also delete the document clicking the
button.

Note: To view the public portal, make sure that you are not logged into RTO Manager.

Country List

From this menu you can add/delete country list which will later be used by the system while generating offer letters. However the system will populate the possible country list from the NCVER AVETMISS text file. To set up country list, follow the instructions below:

Click Admin > Configuration and Setup > Country List.

To add a new country in the list, enter the name on the country, country code region, country level and ABS Value and click Add.
To edit/delete the existing Country Name, click the edit/delete
/
icons. You can edit the fields highlighted in red then click the green tick button to save changes as shown below:

Language List

This menu allows you to set up language list of all the countries. To do this, follow the instructions below:

Click Admin > Configuration and Setup > Language List as shown below.

By default, all the list of languages will be displayed.

To add a new language, enter the language and the ABS Value on the field provided and click Add.
To delete a Language from your list, click the delete icon
.

Student ID Format

A student ID is a unique identification number assigned to a student by an education provider. The student ID serves as a key identifier for the student within the educational provider, and is an essential component of their academic and personal record.

Student ID Format allows you to set up initial information for creating automatic student ID. Student ID Format can use combination of 4 types of information to generate automatic student ID: Country Code, Alphanumeric, Year Digi,t and Number (Auto or Random).

The system uses this information to generate student ID once the Certificate of Enrolment (CoE) is issued for the student. To do this, follow the instructions below:

Click Admin > Configuration and Setup > Student ID Format.

Select the Order Set value as 1 for Country Code (061). This means that you would want to appear your country code in the first position in the Student ID. Generally this may not be required in most cases and you can select Not Used option
Similarly select Order Set value as 2 for Alphabet (ID). This means that you would want to appear Alphabet (ID) in the second position in the Student ID. The Alphabet could be anything other than ID not more than 5 letters/digits which makes sense to you and generally are used as College Acronym.
Select Order Set value as 3 for Year Digit and select the value 4 (2019) for Year Digit as shown in figure above. This means that you would want to appear Year Digit (2019) in the third position in the Student ID. The value 4 for Year Digit represents 2010 and value 2 represents 10.
Auto Number or Random Number by default the Order set value is set to 4 which is fixed and cannot be altered.
- Auto Number - Max. 6 digits. Auto increment. This value will be the starting point.
- Random Number - Max. 6 digits position. This value will be the number of random digits. Where D is the random number.
Once you have selected all the parameters for your desired student ID, click Preview. Your student ID would appear as shown within red boxed area like ID20190001.
Click Setup to save the preferred Student ID format. This format will be automatically used by the system to generate Student ID for students.

Note: The suggested format is YYYYDDDD (which uses the combination of 4 digit year and 4 digit number providing option to have up to 9999 student in any given year with this format).

TCSI reporting has a maximum of 10 Characters for Student ID

Certificate ID Format

This menu allows you to set up a predefined format for the certificate ID as per your choice. This gives you full control to have your choice of ID format for all the certificates you generate for the student for example: statement of attainment, duplicate certificate, transcript of grade achieved, transcript of competency achieved. To set this up, follow the instructions below:

Click Admin > Configuration and Setup > Certificate ID Format.
On the drop down menu, select Certificate type e.g. Certificate, Statement of Attainment

Select Type, Prefix, Auto Number and Suffix for the certificate of your choice as shown in figure above. The example above is for a Statement of Attainment, Prefix is RTO (can also be your college acronym) auto number and Suffix e.g. SoA ( for statement of attainment)
To view sample of the Certificate ID format, click Preview.
Click Set Format to save setup.

Result Grade

This menu allows you to setup all the preliminary information required for result grading for your college. This information will be used by the system for grading purposes when processing the final result. To setup result grading system, follow the instructions below:

Click Admin > Configuration and Setup > Result Grade.
Existing Result grade will show in the list. You may edit/delete the existing grades by clicking
/
icons.
To edit, click edit icon
. This allows you to make updates on the following fields such as Grade, description, Final outcome and transcript display (as shown below).

To add New Grade, enter all the relevant setup information and click Add New to save setup.

Common Grading Types

There are several common types of grading used by education providers. These include:

Competency grading is a form of assessment used to evaluate a student's mastery of specific skills or knowledge. In this grading system, a student's performance is evaluated against a set of predetermined criteria or learning outcomes that describe the expected level of proficiency or competence in a particular area. Competency grading is commonly used in vocational or professional training programs, where there is a strong emphasis on developing specific skills and competencies that are essential for success in a particular field.
Marks-based grading is a form of assessment used to evaluate a student's performance based on a numerical scale. In this grading system, the student is assigned a numerical mark, usually on a scale of 0-100, that reflects their performance on a particular task, assignment, or test. In marks-based grading, a student's final grade is typically calculated based on their cumulative marks across all assessments and assignments throughout the course or program. The specific weighting and grading scale used may vary depending on the institution and the course, but the basic principle is the same - the student's performance is evaluated based on their numerical score, and their final grade reflects their overall level of achievement.
Pass/fail grading is a simple form of assessment where students are evaluated on whether they meet a minimum standard or not. In this system, students either receive a "pass" or "fail" grade based on their performance. In pass/fail grading, the emphasis is on achieving a minimum level of competency rather than striving for a high level of achievement. Students who meet the minimum standard receive a "pass" grade, while those who do not meet the standard receive a "fail" grade.

Each type of grading has its own strengths and weaknesses, and the choice of grading system will vary depending on the educational provider, Course, Subject, and context.

Note: You can choose to have different types of grading types setup in the Meshed Platform and use them for different Course Subjects.

Intervention Strategy

A student intervention is a proactive approach to identify and address academic, social, or behavioural concerns that may be impacting a student's performance or well-being. The goal of a student intervention is to provide targeted support and resources to help the student overcome obstacles and achieve success in school. An intervention may involve a collaborative effort between teachers, counsellors, parents, and other relevant parties to create an individualized plan to address specific needs or challenges of the student. Examples of student interventions may include academic tutoring, counselling, mentoring, or behavioural support. Interventions can be initiated in response to observable issues or as a preventative measure to support students who may be at risk of struggling.

This menu allows for the management and setup of intervention strategies based on the relevant education provider policies and procedures.

To set this up, follow the instructions below:

Click Admin > Configuration and Setup > Intervention Strategy.
A default list of existing intervention strategy will come up. To delete an intervention type, click the delete icon
. To add a new intervention type and intervention strategy, select Add New Intervention Type from the drop down menu (as per below).

Enter new Intervention type and strategy (free type). Click Add New.

Note: Intervention Type and Strategy will later be used during recording of Intervention cases for particular Student and their Courses to support Student.

System Fields Setup

Navigation: Admin> Configuration and Setup > System Fields Setup

This tab allows users to configure custom types and values for some fields in the system. The custom types and values will be displayed as options that can be selected for these fields (typically in a drop down list).

System fields that can have custom values are:

Section Field	Type	Description

Section Field	Type	Description
Defer/Holiday/Suspension	Reason	Student deferral reason.
Diary - Agent	Type	Used in agent communication log section.
Diary - Agent	Status	Used in agent communication log section.
Diary - Offer	Type	Used in student offer communication log section.
Diary - Offer	Status	Used in student offer communication log section.
Diary - Staff	Type	Used in staff communication log section.
Diary - Staff	Status	Used in staff communication log section.
Diary - Student	Type	Used in student communication log section.
Diary - Student	Status	Used in student communication log section.
Diary - Alumni	Type	Used in Alumni communication log section.
Diary - Alumni	Status	Used in Alumni communication log section.
ELICOS Level	Certificate	Used during preview/generate ELICOS certificate to select level of achievement.
English Test	Type	Displayed at student online application step 2. Default values are IELTS, TOEFL, TOEIC, or Other. These are replaced by any custom values.
Tuition Protection Scheme (TPS)	Type	Used in the Tuition Protection Scheme (TPS) section.
Tuition Protection Scheme (TPS)	Status	Used in the Tuition Protection Scheme (TPS) section.
Visa Status	Type	Student visa category based on student origin. Types pre-defined as; Overseas Student (Offshore), Overseas Student in Australia (Onshore), Resident Student (Domestic).
Service From	Address	Used in student service request.
Class Type	Type	Used in setting up class timetable mode. For example Lecture, Class, Tutorial, or Practical.
Outcome Level	Testamur	Used for the option to specify an outcome level when generating Testamur
Professional Development Category	Type	Used in Staff Professional Development (PD) section. If no setup, default data will be shown. E.g. Workshop, Seminar, Webinar etc.
Offer Document Checklist – Document Type	Type	Used in setting up Document Checklist document type.
Offer Document Checklist – Document Type	Status	Used in setting up Document Checklist document type.
Job Role Category	Custom	Used in Host company Job Role Category selection (PY Internship feature).
Diary - Company	Type	Used in Host Company (PY Internship feature).
Diary - Company

Configuration and Set Up